3D printing
3D printers are a progression system: players and groups generate passive income, print rare attachments and get access to unique items. Find a 3D printer kit in the world and place it inside your base.
Parts and where to find them
| Part | Where |
|---|---|
| 3D printer kit | Industrial areas, helicopter crashes, train crashes, airdrops |
| Gasoline generator | Industrial areas, or buy it at the Black Market |
| Filament | Industrial areas, schools, offices, keyrooms (traders don't sell it, but the Black Market buys it) |
| Low-tier USB sticks | Offices, schools, industrial areas, events |
| High-tier USB sticks | Airdrops, hacked crates, keyrooms |
Setting up
You also need a spark plug for the generator and a cable reel.
- Place the 3D printer kit and the generator.
- Connect a cable reel between the generator and the printer.
- Turn on the generator; the printer is now powered.
- Press F on the printer and choose Print.
Filament
- Open the tray in the printer menu.
- Put the required filament in and close the tray to load it.
Each item needs a specific filament; with the wrong one the print won't start. When a USB stick is attached, the menu shows which filament the blueprint needs.
Memory vs USB
- Printer memory: the printer has built-in blueprints. Choose Memory in the menu. Basic items such as base signs need no USB stick, and the memory also has Mid-, High- and Top-Tier Parts that sell for a good price at the Black Market.
- USB blueprints: attach the USB stick to the printer and choose USB in the menu.
What can I print?
"Spool" is how much of one full filament spool a print uses. The whole amount has to be on the spool in the printer when you start.
From printer memory
| Item | Filament | Spool | Time |
|---|---|---|---|
| Box of High Tier Parts (sells for ₽400,000) | Blue | 100 % | 2 h |
| Box of Mid Tier Parts (sells for ₽200,000) | Red | 100 % | 2 h |
| Gold Bar (key trader currency) | Gold | 100 % | 6 h |
| Universal Suppressor | Mid Tier Metal | 25 % | 2 h |
| Sniper Bipod V2 | Violet | 25 % | 2 h |
| NBC Respirator | Blue | 50 % | 25 min |
| Skeleton Grip (red), Vertical Grip (black), Grip (black) | Violet | 50 % | 30 min |
| Dog Tag Case, Key Case | Orange | 25 % | 3 min |
| Base signs (31 kinds: Ammo, Armor, Keys, Medical, Tier 1–5 …) | Orange | 1 % | 5 s |
| Ghillie suits and hoods (green, black, brown) | Green | 100 % / 50 % | 15 min |
| Gas Mask Filter, Charcoal Tablets | Green | 100 % | 15 min |
| Concrete Bricks | Yellow | 100 % | 32 min |
From USB blueprints
Every print wears the stick out; most sticks are good for exactly one print.
| Blueprint prints | Filament | Spool | Time | Prints per stick |
|---|---|---|---|---|
| Box of Top Tier Parts (sells for ₽1,000,000) | High Tier Metal | 100 % | 1 h 07 min | 1 |
| XM2010 Conversion Kit | High Tier Metal | 100 % | 4 h | 1 |
| .408 Barrel Conversion Kit | Mid Tier Metal | 100 % | 3 h | 1 |
| High Caliber Suppressor | Mid Tier Metal | 50 % | 3 h | 1 |
| Shipping Container Kit | Mid Tier Metal | 100 % | 1 h 07 min | 1 |
| Island keycard (floppy disk) | Light Blue | 100 % | 4 h | 1 |
| Delta5 | Light Blue | 100 % | 58 min | 1 |
| Blank keycard | Light Blue | 100 % | 58 min | 1 |
| Raptor-S (gas strike) | Blue | 100 % | 45 min | 1 |
| Car Lockpick | Blue | 50 % | 20 min | 1 |
| Tac Canted Grip | Blue | 50 % | 25 min | 1 |
| Claw Hammer, Hacksaw | Red | 100 % | 20 min | 1 |
| Rifle Wall Kit | Red | 100 % | 25 min | 1 |
| Concrete Bricks, Carrack Display Case | Yellow | 100 % | 1 h 07 min | 1 |
| Tactical Insertion | Green | 100 % | 42 min | 1 |
| Raid Backpack (khaki) | Green | 100 % | 25 min | 2 |
The printed item lands in the printer's own storage. Leave room in it — if it is full, the print is lost.
Important
- Printing cannot be paused.
- If a print is interrupted, the filament is lost. Filament for cancelled or interrupted prints is not compensated.
- Some prints take hours. If a restart is coming, leave at least 5 minutes spare.
Accessories
- Filament spool holder
- 3D printer table with integrated spool holder
